The iSW-810-(P)-12GT-N-R3 1U Rack-mounted Layer 2/3 Managed Onboard Industrial Ethernet Switch features twelve 10/100/1000Mbps adaptive ports and eight 10/100/1000Mbps adaptive ports support PoE/PoE+, comply with IEEE802.3af/at standards, and automatically detect and identify power receiving devices that meet the standards and supplies power to them through network cables. The Layer 3 Managed Onboard Industrial Ethernet Switch supports static routing and dynamic routing protocols such as RIP, OSPF, and BGP. The product adopts the excellent industrial design to suppress the shock, vibration, electromagnetic interference and the instability of the on-board power supply. The hardware adopts fanless, low power consumption, wide temperature and wide pressure design. Through rigorous testing in line with industry standards, it is able to adapt to the harsh requirements of EMC industrial site environments. The product supports wall-mounted and DIN-rail installation, and meets the requirements of EN50155, EN50121 and other rail transit industry standards. It also supports a wide range of operating temperatures of -40℃~75℃, meets the equipment requirements for dustproof performance. The M12 interface is adopted to ensure the airtightness and fastness of port connection, and meet the application scenarios of vehicle vibration and shock. The product supports RSTP and ERPS ring network redundancy protocols as well as single ring, tangent ring and intersecting ring, and can be flexibly networked to meet the needs of the rail transportation market.
产品参数
Interface
Service Interface ・12*10/100/1000 Base-T M12 X-code 8-pin female connector
・Support a set of bypass interfaces
Management interface
Support console, USB M12 A-code 8-pin male connector
Power Interface
Supports 2-way phoenix terminal 5-pin
LED Light
PWR,STU,COM,Link/ACT LED
Network To pology
Ring Topology Support
Star Topology Support
Bus Topology
Support
Tree Topology
Support
Hybrid Topology
Support
ElectricalCharacterization
Input Voltage ・110VDC:77VDC-137.5VDC
・48VDC:12VDC-52VDC
Overall Power Consumption ・Non-PoE full load <15W
・PoEfull load<135W
PoE support(Optional)
PoE ports IEEE802.3af/ IEEE802.3at
PoE protocol
5-12
Maximum output power
15.4W (IEEE 802.3af )
Maximum output power
30W (IEEE 802.3at)
PoE management mode
Support
Layer 2 switching
Switching capacity 128G
Packet forwarding rate
95.23Mpps
MAC address table
16K
VLAN characteristics
・Support 4K,Support 802.1Q
・Threeport-based modes aresupported:ACCESS、TRUNK、HYBIRD
QINQ
・Support basic QINQ・Support flexibility QINQ
PVLAN
・Supports three private VLAN modes:primary、isolated、community
・Supports three VLAN interface modes:native、host、promiscuous
Forward Delay
<4μs
Flow control
Support
Jumbo frame
Support 10K bytes
Ring Network Protocol
・Support ERPS
・Support spanning tree protocol STP/RSTP/MSTP
loopback
Support self loop detection
Link aggregation
・Support IEEE 802.3ad LACP
・Supports 6 aggregationmodes (src-mac | dst-mac | srcdst-mac | src-ip | dst-ip | srcdst-ip) and supports 8 sets of load balancing algorithms
LLDP
Support LLDP link layer discovery protocol
Multicast
・Support IGMP V1/V2/V3,IGMP  SnoopingV1/V2/V3
・Support static multicast
Port mirroring
Support in/out and bidirectional mirroring
line rate
・Supports input andoutputspeed limits, with a minimum granularity of 64kbps
・Support percentage speedlimit
Storm suppression
Support unicast,multicast,and broadcast storm suppression
Port Traffic Statistics
Support statistics onthenumber and speed of sent and received messages
802.1X
Support
Radius/Mac authentication
Support
Port isolation
Support
RMON
Support
NTP client
Support
DHCP server
Support
DHCP snooping
Support
DHCP relay
Support
Ping/racert detection
Support
ARP
Support
Layer 3 routing
Static route
Support
RIP
Support RIP v1,v2
OSPF
Support OSPF v2
VRRP
Support VRRP v2
NAT
Support destination IP/source IP address conversion
Aggregation services
Access Control List (ACL)
・Supports 4000 ACL entries

・Support IP standard ACL

・Support MAC extension ACL

・Support IP extension ACL

・Support protocol type ACL
Quality of service
Quality of Service (QOS)
・Support COS and DSCP priority mapping
・Support queue scheduling for sp, wrr, rr, sp+rr, sp+wrr
Management features
CLI
Support
Console
Support
Telnet/SSH
Support
WEB
Support
Management IP
Support IPV4/IPV6
SNMP
・Support v1/v2c/v3
・Support authentication encryption
・Support trap alarm
User
Support creating users,deleting users, and changing passwords
System log
Support
Firmware update
Support
Environmental conditions
Working temperature -40℃~ 85℃
Storage temperature -40℃~ 85℃
Relative humidity 5% ~ 95%( non-condensing)
Cooling method Natural heat dissipation
MTBF 100,000 hours
Mechanical structure
Dimension (H*W*D)
44mm×480mm×184mm
Weight 2.5kg
Mounting method Rack-mounted
Protection and Certification
IP rating
IP40
Surge immunity IEC 61000-4-5
Radiated RF immunity IEC 61000-4-3
Electromagnetic Fast Transients immunity
IEC 61000-4-4
Conducted RF immunity
IEC 61000-4-6
Electro Static Discharge immunity
IEC 61000-4-2
Vibration and shock
・IEC 60068-2-64
・IEC 60068-2-27
・IEC 61373 EN 50155
Fire protection
EN 45545-2
Railway
EN 50121-3-2 EN 50155
Free fall
0.5m


Address:Headquarters: 5th Floor, Research Building, Tsinghua Information Port, High-tech Industrial Park, Nanshan District, Shenzhen; Nanjing: Building 6, No. 50, Software Avenue, Yuhuatai District