The iACU intelligent access and control unit ZS10 is an intelligent access control device developed by ZTE System Technology Co., Ltd. The system provides functions such as data access, network communication, intelligent edge computing, and linkage control for on - site terminals and devices. It can achieve alarm monitoring of the on - site environment and equipment, as well as public safety surveillance, providing a basis for scientific decision - making and linkage command of public safety incidents. The iACU can be applied in fields such as transportation, underground complexes, tunnels, pipe galleries, intelligent buildings, and industrial intelligent manufacturing.
产品参数
Processor
The number of CPU cores
4*Cortex-A53+1*Cortex-M4
Main frequency
1.3GHz
GPU
32 GFLOPs 32-bit or 64 GFLOPs 16-bit
Operating temperature
-40℃-105℃
Store
DDR 3GB/4GB LPDDR4
FLASH 16G eMMC
TF card expansion support
Expandable to 128GB
Ethernet network interface properties
Application level The second floor
Physical interface 4*10M/100M/1000M RJ45
2*1000M SFP
Transmission mode
Duplex/Half - duplex auto - adaptation
MAC address table
16K
Layer 2 VLANs
4096
VLAN based on IEEE802.1Q
Support
Port-based VLAN
Support
DoubleTagging( QinQ)
Support
VoiceVL AN
Support
Layer 2 multicast
Support IPv4 IGMP snooping(v1、v2、v3)&IPv6 MLD Snooping
Port Mirroring
Support
Port Aggregation
Support LAG、LACP
QoS
Support Port-based、IEEE 802.1p、DS、IPv4-TOS、IPv6 TC、MAC
Full - duplex flow control
Support 802.3x
Properties of the Serial RS485 Interface
Physical interface Two channels and three lines (GND, DATA+/A, DATA-/B), industrial terminal interface
Baud rate
1200bps~230400bps
Properties of the Serial RS 232 Interface
Physical interface Two channels and three lines (GND, DATA+/A, DATA-/B), industrial terminal interface
Baud rate
1200bps~230400bps
DI interface properties
Physical interface
8 pieces (4 NPN type and 4 PNP type), industrial terminal interface
Wet contact
ON:10VDC-30VDC
OFF:0VDC-3VDC
Optical isolation protection
2.5 KV RMS(1 minute)
Surge protection
Support VRRP v2
NAT
10KA
DO interface properties
Physical interface
8 (4 SOURCE type and 4 SINK type), industrial terminal interfaces
Output leakage current
<0.5uA
Rated current
500mA/channel @ 25℃
Overcurrent protection
2A/Channel @ 25℃
Overvoltage protection
40VDC
Expand capabilities
Ethernet communication module
2
Serial communication module
2
DI/DO module
32
Intelligent Edge Computing Module
2
5G communication module
1
Other properties
Power consumption
Less than 8W (excluding optical module)
Overall dimensions (Width * Depth * Height)
82mm*85mm*132mm
Weight
835g


Address:Headquarters: 5th Floor, Research Building, Tsinghua Information Port, High-tech Industrial Park, Nanshan District, Shenzhen; Nanjing: Building 6, No. 50, Software Avenue, Yuhuatai District